Repair a plumbing hole in a cement stucco wall. (2023)


Repair a plumbing hole in a cement stucco wall.

Below are all the basic tools we use and recommend on Amazon's website.
Live long and plaster hats, shirts, and other cool stuff.
Kirk Giordano Plastering Inc.

This video explains how to fix any plumbing hole in a stucco wall, where the plumbers had to install new plumbing pipes or fittings or make repairs.

Note: the plumber who did the repair did a fine job fixing the plumbing pipes but left guys like us a mess to put back together.
He should have broken from stud to stud and left the piece of wood he cut through.
Note the methods for fixing a plumbing hole in a stucco wall are the same as any other type of hole in a stucco wall.

We could have nailed the wood back in place, waterproofed the areas, added some stucco netting, and applied the stucco for this repair.
However, the plumber took the plywood with him, making our job more difficult, but nothing we couldn't handle.
If you folks are going to have plumbing repairs, it’s best to tell the plumber, repair the leak, and re-attach the wood where they found it; thus, if you stucco it back yourself, It would be much easier.

Eisenwall also manufactures a DIY or homeowner-friendly product called “Rapid set Stucco.”
It’s sold at HD and lowes plus all other hardware stores, “Rapid set stucco” is sold in 10 or 25-pound boxes or larger amounts in 50 to 94-pound bags. This is a user-friendly product.
What that means, the sand is already in the bags. You add water.

Subscribers who wish to learn how to repair your stucco, type your question into our channel, and like magic, a video will appear to explain how it’s done. Kirk’s website. Jason’s Website.

Thank you all for watching, and wishing all a beautiful day!


Hi guys, Kirk and Jason here with Kirk Giordano, plastering, today, I'll, show how to repair a hole, a plumbing, hole.

The camera, won't show, but we, this fella here did a great job with his plumbing.



He made it a little difficult for fellows like me who got to come in after.

Why? Can.

You see why? It'll, make it a little tougher for me? Well I'll, tell you why, in case, you can't, see, it, you fellows who watch what we do probably caught it immediately., There's, wood, right here.

He cut through the wood and the stucco, made his job.



He could have put he could have cut back from stud to stud.

Then put back the wood and fellows like me.

And he could have actually did the insulation.

The homeowner sent me this last night on an email and I said, well, dude, do you have any insulation there?? And he says, what's, that?, I said, never mind man, I'll, bring my own insulation, I'll.

Do you a favor, and I'll cut this and put it in here, anyway, the textures pretty cool.

Too, I looked at that.

Not that piece of cake, but I looked at all the patchwork.

He had around the house and I'm going to show you some of that, because it's kind of interesting how people had an idea, but they didn't do it right.

So Jay is going to break this out., Then we're going to get started I'm actually going to fish some of this insulation, in.


This sort throat, I, got, hopefully.

You guys could hear me, makes for a good impression of Sylvester, Stallone, say, like in the movie, Rocky, "yo, Adrian? Or that other movie, First, Blood, "There's, one man, dead, it's, not my fault; I, don't want any more hurt." That's.

The only good thing about a scratchy throat, but anyway, we're going to go.

Ahead; Jay is going to first break this out, I'm going to stick this flat, our insulation in there.

It actually goes this way.

Give us a little bit more of a solid background, because we're not going to have the wood to put here, the stucco's going to have a tendency to want to push in.

So there's actually give me a little bit more solid of a background.

Anyway, Jay is going to break this out and we'll show you step-by-step how to do this in case you guys want to do it yourself.

Alright, guys before I finish out the break out here., I mustache.

You guys in question.

Why is breakout so important?, why? Well break out is important, because without 2 to 3 inches of good existing paper.

We cannot waterproof this patch.

There are ways to try and put it together, but you need paper to overlap our new paper to make sure that that patch is waterproof, without that.

You can't guarantee it., We, just don't do it.

So anyway, on these sides here I've got good paper.

You see I got this plastic here.

This is just to stop anything from going in the house, is it a big deal? no.

But why not do it if you can,? So when you're doing breakout, wear a mask, if you got it it's hard to talk through them, though you got to go small, if you start with your Bulldog tip way up here, you end up with these big chunks that you can't break out., you can.

But you end up damaging the paper more than you mean to.

So you start small little like quarter, inch, intervals and pardon.

This thing is going to be real loud right on my microphone, but just like that, you're doing little bitty, pieces, and it'll, just knock it all out Now.

What do you do with you end up with all these little clunkers? You, just change how you're angled, or sometimes you can just pull them off with your fingers.

But if you can't do that, and you need to get it off, just aim down pop it right? Off., anyway.

You see where I'm going with this - thankfully, this paper is in pretty good condition.

Once you get up away from this edge here, where it's, you know, there's, no wood support.

It I'm going to finish this up and then we'll show you where we're going from here.

All right, guys, J did the nasty work of break out.

They've put out something oK.

We've got our two layers of paper here.

And can you use a membrane of rubber? Yeah, you could do that.

But the paper is fine, here's.

One thing to consider, okay, you overlap your existing paper.

You go over the existing paper.

And here you go under the existing paper.

The new paper has to go under the existing paper that way if water goes through this painted surface, which is unlikely, because the house is 90 years, old, it's, been painted, probably 30 times if it goes on and goes onto this paper, it'll drip harmlessly here and harmlessly on here., what I've done thus far, is, I've, cut this wire just to show you guys where we're going, I'm going to go ahead and caulk.

It first.

This stuff is a nice construction sealant.

But if you get it on your fingers it's a real nightmare, so I'm gonna go ahead and caulk that put this on I'm going to show you how we do the coats we're going to get to that part of how we do.

The finish too.

I was watching Jay do this when he used one of my lines you're going to do dad's sit here and admire me, break it out?.

So I had to climb up 30 stairs and get the mud mix., Anyhow, we're, almost at that stage guys all right guys.

Now you weekend stucco warriors want to do like the professionals do like what we do? What Jay did is he mixed this whole bucket and he's got Portland cement, see this stuff here that's for the - we're going to throw on finish that's, what that's for this won't harden for about four hours.

But this right here he took half of the bucket, and he had a Luminite to it.

What is Lluminite? Well.

Something that accelerates the process.


What I'm going to do is I'm going to go ahead and knock this out it's going to set within 10 minutes, how long does it take to learn to master Luminite? Try about 100 jobs, guys, minimum., Of course, the stuff it's like food goes bad.

You buy a 100-pound sack or at technically a 94-pound sack.

It will go bad.

If you don't use it all up.


How many of you guys would use a 94-pound bag? Nobody, just for us.

Stucco guys.

Another thing to, Jay showed you breakout.

Why do I got a sore? Throat, I, don't have a cold, two weeks ago or a week ago, I was doing a video and I was showing the stucco, I didn't have a mask on.

And because I have a somewhat of a compromised immune system, that dust, gave me a sore throat.

so guys, you never know, what's in stucco, wear a mask if you're going to break out, and how often do I break out?, very rarely.

Not only do I, not like it.

But it just don't work for me, it'll, tear my system, up, any way you see what we're what we're gonna do, I told you guys I'd show you what they've done here and how to match it.

I will do just that, because I'm gonna let this set for about, Oh 10 minutes in that 10 minutes, but take you around the corner because right here is too tight, a fit we're working between a retaining wall, that's, uh, that's, tough to work.

Right next to a retaining wall show what we do, how do I know know,? Because we've done about 600 videos now and I'm getting the hang of what I'll show what won't, anyway, I'm gonna take you around the side, I'm gonna show you folks something, ok, guys, I'm going to show you why or how to match this finish.

They have about three or four different guys on this 90-year-old house, who all gave it their best shot, some of them aren't bad in fact.

Okay, this is bad.


What they done first is the mix of soupy, cement, usually Portland with sand.

They make it real soupy, put the brush in it and throw it on it's called a Dash finish.


They did the Dash finish here, where it looks like moon, craters, very heavy.

A lot of water makes moon craters like that the drier it is makes mountains.

Then after they did that they floated their edge.

I can see the edge, is floated, but they should not have allowed it to stay there.

Then what they did was they took a trowel, probably a little-bitty, trowel square trowel.

And they just went up like this.

They came here, now, that really isn't how your match to finish it's close, but it's, not on the money.

What I'm going to do is I'm going to - it just like they did I'm going to put this as a template, and go around put it go around, put it and go around that'll match it on the money.

The garage is somebody's attempts, which kind of interesting looking, but I'm on some fellows house, I'm, not going to go showing everybody everybody's attempts, I'll show you our attempt.

When we get there all right, guys, soupy mud throwing the Dash finish on here, all it is is Portland cement.

Now you got to count for what they've got it's, just a flick of the wrist, guy, flick of the wrist.

And what you want to do when dashing is go over everything completely and don't, just put it in one spot go over it, give it a chance to set,? Because if I go too heavy it's going to slide, that's, how the dashes work, I'm going to show you another example in a second.

So let me get their texture.

First then we'll figure out the lines.

no, I, haven't figured out the lines yet, I have an idea.

Not been wrong.


Well, actually, I have they just some textures.

Take me a lot longer to match than others and that's.

Normal okay.

Now, that's got a set.

I'm going to do something over here's.

Why I'm waiting for it.

Dah, finish guys, okay, too much dash.

Give you an idea why we got to wait, I'm in no hurry, I'm, killing time, right? Now, because I got to wait ten minutes for this.

So while I'm waiting, when if you put it too thick, now watch that's it's over a painted surface.

So it got no suction so it's going to dry.

Now what happens if I hit it more it's going to fall it's going to drag,? See? How it's starting to come down, it's, crying, volcanoes., Okay, and Plus.

Now, the tool they used Oh say for example., I took a clean dash brush.

A dash brush is about like this, say, you're going with a rectangular circle.

If I were to hit this right now.

What would happen? it's too wet, it'll just slide, down., Or.

If I use a little-bitty trowel, it'd fall down.

Let me give you an example, and you can use a brush, I had a brush somewhere here.

You can use a brush to make little patterns.

What I'm prepared to do is take something hold it here, and make some patterns first with the brush, but I got to let this set, but here's, what happens if you hit it too thin? Guys, you take my little pattycake type, trowel here, you hit it.

You see how it starts to slide.

So I've got to kill some time, and allow this to dry.

You can't do anything with it because it just slides.

Now, if this fellow was home, he'd say, "Kirk, what the heck you doing messing up my wall?", So I'm going to go ahead and clean up his wall for him, and put it back into the bucket when this is ready, I'll show you how we do it.

So you can just skip forward.

okay, guys, let's, try the old tic-tac-toe type, finish.

Everybody plays that game - this way - that way Okay, come on now, see what I'm doing.


What we can do is we want to tie into some existing stuff.

Maybe that's.

What these fellows did, they said.

Gee, whiz, let's play a game.

Guy, tic-tack-toe., alright.

Now, I didn't, get rid of those trowel lines.

Well, take afloat and just float them.


Tap them, out, right around where the so-called squares are or rectangles that's one way to do it a lot of ways to do this a lot of different finishes on this house.

There get rid of that get rid of that.


That is what is closer than what the other fellas got.

It looks pretty good to me.

Take it and feather in the joints now feather in a little bit.

And there you have it that's, the so-called tic-tac-toe finish., I like that, anyway, guys.

My name is Kirk.


Am with Kirk Giordano, plastering.


Thank you for watching.

And as usual, we'll, see, you guys at the next one.

Once, again, folks.

We thank you for watching, and I, really enjoy all your comments.


You guys like this video, please click the like button down below, and also.

If you enjoy what we do, subscribe to our channel.

So we can keep making these videos for you.

My name is Kirk and Jay.


Thank you for watching.

And from the entire Giordano family, we'll, see on the next one.


Repair a plumbing hole in a cement stucco wall.? ›

If you believe the stucco requires a minor repair, you can remove the damaged section of stucco, much like you would with damaged drywall or rotted wood. Patch the area with a stucco mix that matches your current exterior. Apply three coats of the stucco and allow for drying time between applications.

How do you fix water damaged stucco? ›

If you believe the stucco requires a minor repair, you can remove the damaged section of stucco, much like you would with damaged drywall or rotted wood. Patch the area with a stucco mix that matches your current exterior. Apply three coats of the stucco and allow for drying time between applications.

How do you open a hole in a stucco wall? ›

To repair a small hole in stucco, you will basically want to clean the hole with a small wire brush and then blow out the hole using compressed air or by blowing into the hole. You will then apply caulking into the hole (polyurethane is recommended).

What can I use to repair stucco? ›

Small, thin cracks in your stucco wall can be easily fixed with exterior latex paintable caulk. Choose a caulk color that is close to your stucco color. You may not find an exact match, but something close to it. If need be, you can touch up the caulked area with an exterior paint that matches your stucco color.

Is stucco considered concrete? ›

Concrete is made of cement, water and sand. Stucco is made of these ingredients as well, plus lime. One big difference between these two home exteriors is that when dry, stucco is breathable — it has tiny pores that allow water to evaporate from behind it so that moisture doesn't build up and cause rot.

Is stucco water proof? ›

Isn't Stucco Waterproof? Since stucco is a masonry product, it is often believed to be waterproof already. However, this isn't totally true — stucco is indeed permeable and will let some water through.

What happens if water gets behind stucco? ›

Water leakage is a common issue with stucco in areas where seasonal rain is the norm. If water gets behind stucco it will soften the areas it comes in contact with, eventually causing the stucco to break away and fall off in sheets.

How does water get behind stucco? ›

Entering Through Cracks

Of course, stucco only provides an effective barrier against water when it is solid and intact. If cracks develop for any reason, they can allow water to reach inside. Once inside, they can cause swelling and shifting that lead to worse cracks that allow more water inside.

What does water damage on stucco look like? ›

Since stucco turns darker when wet staining can remain after stucco dries. Staining can be seen as either white hazy streaks or as dark blotches in the color. Staining is your first indication of water problems and if not addressed can result in efflorescence and blistering.

Can I use concrete patch on stucco? ›

Spread and texture the concrete patch to match the surrounding stucco - wet the trowel to achieve a smooth finish. NOTE: for patches or cracks over 1/4 inch thick pre-mixed stucco patch should be applied in multiple layers, allowing each layer to dry before applying the next.

Can I use cement to patch stucco? ›

Apply cement to the patch.

If the stucco sags, wait 5 minutes for the stucco to harden some and then level it again. If you wet the existing wall, it will help the new stucco to adhere to the old. Stucco does not stick to oil, mold, dust, dry, loose or very smooth surfaces.

What is the best product to patch stucco? ›

STUKKOPATCH™ The Best Stucco Patch Elastomeric Cementitous Surface Repair & Patch Compound
  • Sand or Rough Texture Finish.
  • Cementitious Surface Repair Compound.
  • Superior Mold, Mildew and Fungi Resistance.
  • High Strength Durability.
  • The Best Stucco Patch.
  • Easy Application and Water Clean Up.

Can quikrete be used to repair stucco? ›

QUIKRETE® Pre-Mixed Stucco Patch (No. 8650) is a ready-to-use acrylic latex formula for making repairs to cracks, breaks and holes up to 1/4” (6 mm) thick in stucco surfaces.

How thick can you patch stucco? ›

Apply Stucco Patch to the surface with a putty knife, broad knife or margin trowel Cracks Spread and texture the stucco patch to match the surrounding stucco. For best results a rubber stucco float is recommended. Cracks or holes up to 1/4” (6 mm) deep can be repaired in one application.

How long does cement stucco last? ›

Stucco is a very durable finish material with a typical life span of 50-80 years or more. Although it is one of the most durable surfaces available, it also features the lowest annual maintenance cost when compared to other siding materials.

What is difference between stucco and cement? ›

Portland cement-based plaster is such a material that uses portland cement as the binder. It is sometimes called “traditional stucco.” Stucco is a somewhat colloquial term for portland cement plaster, and some people consider it to refer to an exterior, not interior, finish.

Is stucco a plaster or cement? ›

The terms cement plaster and cement stucco are used interchangeably. They both describe a combination of cement and aggregate mixed with a suitable amount of water to form a plastic mixture that will adhere to a surface and preserve the texture imposed on it.

What is the best waterproof sealant for stucco? ›

The best sealer for stucco is the Iso-Tek 8100. Best used as a water repellent sealer on natural stucco or as a primer and bonding agent for stucco that will be painted, the Iso-Tek 8100 is an industrial grade penetrating concrete sealer.

What is stucco weakness? ›

Stucco, similar to concrete, is very strong in compression but weak in tension. Stucco compression strengths range from 2000 to 3000 psi, but tensile strength is only 100 to 200 psi.

Is quikrete stucco waterproof? ›

Quikrete 80 lb. Stucco Base Coat with Water-Stop does not require any additional additives to create a stucco surface that is highly water resistant.

Can you use Flex Seal on stucco? ›

A: You can use Flex Paste on a wide variety of surfaces such as wood, glass, tile, concrete, aluminum, metal, brick, stucco, masonry, copper, fabric, fiberglass, ceramic, porcelain, natural stones, roofing, PVC, EIFS, EPDM, CSPE, Hypalon polyurethanes and so much more.

Can stucco construction hold water? ›

Since stucco is an absorbent cladding and readily holds moisture and water, it can't be 'completely waterproofed'. However, you can manage moisture and air around your stucco cladding – which is a more complex process than most builders believe.

Will painting stucco make it waterproof? ›

Elastomeric paint is a high build coating that is designed to protect masonry surfaces. These coatings help protect your stucco from wind driven rain, and can create a waterproof system if applied correctly.

Does stucco need to be sealed? ›

New stucco should be sealed with a clear concrete masonry sealer, typically made of a silicone material. For older stucco that's already showing signs of cracking, waterproof elastomeric paints are an excellent choice to preserve and protect your stucco.

What causes stucco to fall off? ›

When moisture does accumulate behind the stucco, it will soften any material it touches, which will cause the stucco to start breaking and falling off, sometimes in small quantities and other times in larger sheets.

How long does stucco stay wet? ›

The process of wetting stucco is an essential component of the process of installation and is required for the stucco's cure. Stucco must be kept damp until at minimum 48 hours following the installation. Stucco will last for over 50 years if properly maintained and installed.

Can stucco absorb water? ›

Stucco is a very porous material. While much rainwater runs off of a wall during a rain event, stucco also absorbs quite a bit of it. In addition, windows shed quite a bit of water into the wall system, especially at the bottom or “sill” of the window.

How do you know if there is mold in stucco? ›


As we mentioned, mold growth is a common problem that occurs when moisture seeps beneath your home's stucco exterior. Though you likely won't be able to see mold from your home's exterior, you can usually identify the presence of mold if you notice staining or discoloration on the stucco's surface.

What happens if you don't repair stucco? ›

By failing to remediate stucco that has allowed excess water to intrude beyond its surface, you are opening your home up to rot and hazardous mold development. If left unchecked this could seriously compromise the structural integrity of your walls and cause your family to become sick.

How long does it take for a stucco patch to dry? ›

Use latex paints only. Curing: QUIKRETE® Stucco Patch will begin to form a surface skin in about 20-40 minutes and will become hard in about 2 hours depending on temperature, humidity and patch depth. Additional curing will continue for up to 3 days.

Is it better to repair or replace stucco? ›

Stucco repair is often quicker, simpler and considered a short-term solution. Conversely, stucco replacement is more laborious but often considered a long-term strategy to deal with several occurrences of short-term incidents.

Which quikrete should I use for stucco? ›

QUIKRETE® Base Coat Stucco - Fiber Reinforced (No. 1139-78) is a Portland cement based stucco used for the construction and repair of stucco walls. The synthetic fiber-reinforced plaster resists shrinkage cracking and has very low sag characteristics.

Is cement stucco better than synthetic stucco? ›

Traditional stucco is more durable, fire resistant, and has greater longevity, being able to last up to 50 years with low maintenance. Traditional stucco is also very porous and dries out quickly, while synthetic stucco is not and can have water damage issues if not installed properly.

What kind of cement do you use for stucco? ›

Type S is the most flexible mix, perfect for every masonry project. Engineered for laying block or stone above- or below-grade, or as a stucco mix, Type S mortar is the pro-grade mortar mix you need to get the job done right.

What is the difference between surface bonding cement and stucco? ›

Surface bonding cement can be compared to stucco, but the important differences in the mix are glass fibers and special additives including an acrylic additive. A surface bonding cement mix applied on CMU or concrete block walls includes fiberglass and an acrylic fortifier to add strength and flexibility.

Can you use spackling on stucco? ›

DAP Fast 'N Final Lightweight Spackling lets you patch and prime in one easy step, saving time and money. It dries fast with no need to sand or prime, letting you paint in minutes for a virtually invisible repair. Ideal for repairing small holes, cracks and dents in drywall, plaster, wood and stucco.

What will bond to stucco? ›

QUIKRETE® Concrete Bonding Adhesive (No. 9902) permanently bonds new concrete, plaster, and stucco to existing concrete, plaster, and stucco. Eliminates the need for roughing the surface before the application.

What is stucco putty? ›

Product Description. Value Stucco Putty is a water-base, an economy quality PVA based filler pigmented with fine grade alkali resisting pigments for the filling of surface irregularities and indentations, hairline surface crack etc. It helps to produce a smooth intermediate surface to enhance beauty of topcoat.

What is the difference between acrylic and cement stucco? ›

Traditional stucco provides a rougher texture with minimal maintenance required, and acrylic stucco provides a smooth texture but may require more routine maintenance (i.e., washing off dirt buildup). The finish of each type can also vary depending on how they're applied (which will cost less or more money).

What bonding agent for concrete and stucco? ›

DRYLOK® Latex Bonding Agent bonds new concrete, stucco, stone, plaster and more to structurally sound, difficult surfaces like dense, slick or porous concrete, stone, drywall, hardboard, and plaster walls.

Can you repair concrete with quikrete? ›

QUIKRETE Concrete Repair is used for repairing cracks and holes in concrete and masonry up to 1/2" wide. It can be used on driveways, sidewalks, patios, stucco, concrete and masonry walls.

How thick is stucco on concrete wall? ›

Conventional stucco over masonry surfaces may be applied with two or three coats. Two-coat systems over masonry consist of: first coat = 3/8 inch thick and finish coat = 1/8 inch thick; or over cast concrete consist of: first coat = 1/4 inch thick and finish coat = 1/8 inch thick.

Can you put new stucco over old stucco? ›

Ron Webber, owner of Prime Plastering in Irvine, Calif., responds: Applying new stucco over old stucco (often called re-stuccoing) is a fairly simple-process. If the existing wall is in good condition, this job can be straightforward.

Can I use mortar to patch stucco? ›

MORTAR & STUCCO REPAIR is designed to repair cracks and defects in mortar, stucco, EIFS, stone, brick or block. This water-based acrylic product is used to repair or seal surfaces, such as stucco, EIFS, mortar joints, grout joints, fiber cement board, block, brick, concrete, stone, tile, wood and more.

What do you use to cut a hole in stucco? ›

A circular saw with a diamond blade attached is also a great tool to have for cutting stucco. It is larger than a grinder but also has a depth gauge, which comes in nice for cutting the stucco out. The handles are also a big advantage and lets the user have a more comfortable grip on the saw.

Is it better to paint stucco or re stucco? ›

Stucco needs to breath – One of the main reasons you shouldn't coat your stucco with paint is because stucco is porous. This allows moisture that hits the surface to easily evaporate away. A coat of paint can harm that breathability.

How do you apply stucco over existing stucco? ›

Applying the new stucco

You'll want to apply a layer of bonding agent to the top of the existing stucco with a paintbrush or sprayer. Follow the manufacturer's instructions, which you should be able to find on the product itself. Then, let it dry. Meanwhile, mix up your new stucco in a cement mixer.

Can you use quikrete to patch stucco? ›

QUIKRETE® Pre-Mixed Stucco Patch (No. 8650) is a ready-to-use acrylic latex formula for making repairs to cracks, breaks and holes up to 1/4” (6 mm) thick in stucco surfaces.

What is the difference between stucco and cement? ›

Portland cement-based plaster is such a material that uses portland cement as the binder. It is sometimes called “traditional stucco.” Stucco is a somewhat colloquial term for portland cement plaster, and some people consider it to refer to an exterior, not interior, finish.

What is the use of stucco filler? ›

National Stucco Filler is recommended as an interior body filling or surface leveling putty for concrete, plaster, gypsum, masonry works etc. This can be used for filling up open grains of hard wood, MDF and other wooden surfaces, to obtain a smooth even surface.

Is it OK to drill into stucco? ›

Can I Drill Through Stucco? The answer is 'Yes. To drill through the stucco material you need to choose a suitable drill bit. The most ideal bits are carbide tip bits, masonry bits which can be attached with a hammer drill to drill through the Stucco easily.

What is the plaster on the outside of a house called? ›

Modern stucco is used as an exterior cement plaster wall covering. It is usually a mix of sand, Portland cement, lime and water, but may also consist of a proprietary mix of additives including fibers and synthetic acrylics that add strength and flexibility.

Top Articles
Latest Posts
Article information

Author: Greg O'Connell

Last Updated: 29/11/2023

Views: 5229

Rating: 4.1 / 5 (42 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Greg O'Connell

Birthday: 1992-01-10

Address: Suite 517 2436 Jefferey Pass, Shanitaside, UT 27519

Phone: +2614651609714

Job: Education Developer

Hobby: Cooking, Gambling, Pottery, Shooting, Baseball, Singing, Snowboarding

Introduction: My name is Greg O'Connell, I am a delightful, colorful, talented, kind, lively, modern, tender person who loves writing and wants to share my knowledge and understanding with you.